Industrial Enclosures / Console Desks
We use Electro-Galvanized (EG) steel and Stainless Steel (SS) in our enclosures for power distribution, control panels and industrial automation usage.
Our customized sheet metal enclosures are suitable for all industries requiring Ingress Protection (IP) rating with certification from recognized Accreditation Body like TUV SUD PSB Pte Ltd Singapore. These enclosures provide a high level of reliability in demanding operating environment. Ingress Protection Marking complies to IEC Standard 60529 can be classified and rates the degree of protection provided against intrusion (body parts such as hands and fingers), dust, accidental contact, and water by mechanical casings and electrical enclosures.
Reference for degrees of protection provided by enclosures in accordance to the Singapore Standard IEC 60529 for electrical equipment can be found here. |
There is a wide range of IP rated enclosures that are available as detailed below:-
IP Rating |
First Digit (hazardous parts protection) |
Second Digit (liquid ingress protection) |
IP 44 |
Protection against entry by most wires, slender screws etc. |
Protection against water sprayed from all directions |
IP 54 |
Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment. |
Protection against water sprayed from all directions |
IP 55 |
Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment. |
Protected against low pressure jets of water from all directions |
IP 65 |
No ingress of dust; complete protection against contact (dust tight). |
Protected against low pressure jets of water from all directions |
IP 66 |
No ingress of dust; complete protection against contact (dust tight). |
Protected against powerful water jets of water |